Skip to content

Plywood organizer in your size

A low tray with a grid of cells — for a desk, drawer, workshop or bathroom. Width and depth to fit your space, height and cells to fit your things.

Opens a 300 × 60 × 200 mm tray with 12 cells.

An organizer that fits your drawer

Generic organizers from a shop either stop short of the drawer wall or don't fit at all. With Rilbox you measure the drawer, enter external dimensions, and the tray fits snugly. The rest of the space you divide into cells for what you actually keep: pens, cables, screwdrivers, cosmetics, hair ties, small hardware.

An organizer is the same box with dividers, only low: wall height 40–80 mm so everything is visible and easy to reach from above.

What you set

Width × depth
20–500 mm
Wall height
from 20 mm
Cells
up to 20 × 20
Plywood
3 or 4 mm

The number of dividers across and along is independent. If you want three long slots for pens next to a grid of small cells, use two organizers side by side, each with its own grid. The cell size is shown in the builder.

Where it's used

Assembly and strength

Walls, bottom and dividers connect with tabs into slots — the piece assembles by hand in a few minutes and holds without glue. Dividers sit in slots in the walls and the base, so they don't fall out even when the organizer is carried. In a low tray the dividers also keep the bottom from sagging.

For a desk organizer 3 mm plywood is usually enough; if the cells hold heavy tools or the tray is large, over 300 mm, choose 4 mm.

Price

The price per piece is calculated in the builder from size, thickness and number of dividers. A manager confirms the price and lead time (1–2 working days after payment for a single box; for larger batches, by agreement) after your request; delivery by Nova Poshta.

Build a box Enter your drawer dimensions — the tray will fit snugly.

Related pages